RML-600 Pneumatic Motorcycle Lift Platform with Front-Wheel Vise
Ranger RML-600 pneumatic motorcycle lift
With a 1,000-lb. lifting capacity, RML-600 lift platform brings professional ease to any motorcycle or ATV service job.

    If you build, re-build, repair, service, maintain or store motorcycles and you still don’t have a Ranger motorcycle lift, you’re missing out. Ranger motorcycle / ATV lifts are known as some of the finest in the industry for quality, features, safety and longevity.

    Take the Ranger RML-600 Motorcycle / ATV Lift. This 1,000-lb. capacity power-house brings convenience and ease to any motorcycle or ATV job. Constructed from rugged 12-gauge steel with extra-wide drive-up ramps and dual-screw front wheel vise, the RML-600 Motorcycle Lift is the reliable heavy-lifter that brings the joy back to motorcycle / ATV maintenance. Every Ranger RML-600 Motorcycle Lift comes fully equipped with a generous 84” by 24” work table that will easily hold most bikes. But on the off chance that isn’t quite enough room, the 12” side extensions and the 13” front table extensions give you a massive 97” by 48” area to work and play in.

    Bottom line: the design of this motorcycle and ATV lift platform is legendary. A retracting wheel deck provides the incredible free-hanging wheel accessibility of a two-post car lift while seven fail-safe locks keep the table securely in place under load. Top that off with an incredibly durable powder-coat finish and one of the most dependable pneumatic designs in existence and you're virtually guaranteed years and years of trouble free-performance from your new RML-600 Motorcycle Lift from Ranger.

    Need an extra boost? Check out the RML-1100 Motorcycle / ATV Jack. Or if you are looking for a more robust feature-set and the ability to lift an additional 650 lbs., consider the RML-750HD.

    • Constructed out of 12-gauge steel
    • 10-sec lifting vise
    • Pneumatic lifting cylinder
    • Durable powder-coat finish
    • Dual-screw front wheel vise
    • Drop-away rear wheel deck
    • 12" bolt-on side extensions
    • Extra-wide drive-up ramps
    • Hold-down rings
    • 12" side extensions – standard

    • Lifting capacity: 1,000 lbs. / 455 kg
    • Lowered height: 7" / 178 mm
    • Raised height: 31-1/2" / 800 mm
    • Table length: 84" / 2134 mm
    • Table length with extension: 97" / 2464 mm
    • Table width: 24" / 610 mm
    • Table width with wide extensions: 48" / 1219 mm
    • Lifting time: 10 seconds
    • Shipping weight: 545 lbs. / 247 kg
    • Shipping dimensions: 30" x 85" x 11" / 762 mm x 2159 mm x 279 mm
    Ranger RML-600 pneumatic motorcycle lift
    Ranger RML-600 pneumatic motorcycle lift
    Lowered RML-600 motorcycle lift
    RML-600 ATV lift with optional RML-800 motorcycle vise
    RML-600 motorcycle lift locks
    RML-600 motorcycle lift wheel vise

    Featured accessories for the RML-600

    Llámenos GRATIS en USA al:
    Preguntas Frecuentes

    Breve Información

    Lifting capacity: 1,000 lbs.
    Lowered height: 7"
    Raised height: 31-1/2"
    Table length: 84"
    Table width: 24"
    Lifting time: 10 sec.
    Shipping weight: 545 lbs.
    Vea toda la información »
    Envío de Pedido Gratis Dentro de U.S.A.*
    Información Acerca de este Producto Descargue El Manual de Instrucciones Vea & Descargue Nuestros Catálogos de Productos